NAVIGATION


Cationic Polyacrylamide

Catalog Number
ACM9003058-12
CAS Number
9003-05-8
Product Name
Cationic Polyacrylamide
Structure
Category
Polymers
Description
Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid.
IUPAC Name
prop-2-enamide
Molecular Weight
3-16 Million (adjustable)
Molecular Formula
C3H5NO
Canonical SMILES
C=CC(=O)N
InChI
InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5)
InChI Key
HRPVXLWXLXDGHG-UHFFFAOYSA-N
Boiling Point
189 °F at 2 mm Hg (EPA, 1998);192.6 °C;192.6 °C;347-572°F (decomposes);347-572°F (Decomposes)
Melting Point
184 °F (EPA, 1998);84.5 °C;84.5 °C;84.5°C;84.5 °C;184°F;184°F
Flash Point
280.4 °F (EPA, 1998);280 °F (NIOSH, 2016);280 °F (NIOSH, 2016);138 °C (280 °F) - closed cup;138 °C c.c.;280°F;280°F
Purity
99.9%
Density
1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 °C/4 °C;1.13 g/cm³;1.12;1.12
Solubility
greater than or equal to 100 mg/mL at 72° F (NTP, 1992);9.00 M;In water, 3.711X10+2 g/L at 20 °C; 4.048X10+2 g/L at 30 °C;Soluble in ethanol, ethyl ether and acetone;Solubility (g/100 mL) at 30 °C in: methanol 155; ethanol 86.2; acetone 63.1; ethyl acetate 12.6; chloroform 2.66; benzene 0.346; heptane 0.0068;WATER-SOL HIGH POLYMER;390 mg/mL at 25 °C;Solubility in water, g/100ml at 25 °C: 204 (very good);(86°F): 216%
Color/Form
off-white
Complexity
57.9
Covalently-Bonded Unit Count
1
EC Number
201-173-7;618-350-3;618-657-2
Exact Mass
71.037114g/mol
Formal Charge
0
Heat of Vaporization
61.5-76.5 kJ/mol at 357-413 deg K
Heavy Atom Count
5
ICSC Number
0091
Log P
-0.67 (LogP);log Kow = -0.67;-0.67;-0.78
MeSH Entry Terms
Acrylamide
Monoisotopic Mass
71.037114g/mol
NSC Number
118185;116575;116574;116573;7785
Odor
Odorless
Other Experimental
Boiling point: 87 °C at 2 mm Hg; 103 °C at 5 mm Hg; 125 °C at 25 mm Hg; readily polymerizes at melting point or under UV light;Conversion factor: 1 mg/cu m= 0.34 ppm, 1 ppm = 2.95 mg/cu m;Stable at room temperature but may polymerize violently on melting;Viscosity 50% aqueous solution: 2.71 cP @ 25 °C;Heat of polymerization: 19.8 kcal/mol;Henry's Law constant = 1.7X10-9 atm-cu m/mol at 25 °C (est);Hydroxyl radical reaction rate constant = 1.1X10-11 cu cm/molecule-sec at 25 °C (est);Ozone reaction rate constant = 1.8X10-18 cu cm/molecule-sec at 25 °C (est);POLYACRYLAMIDES, FREE OF MONOMER, ARE INERT
Rotatable Bond Count
1
RTECS Number
AS3325000
Stability
Stable under recommended storage conditions.;Thermally unstable. Polymerization may be caused by elevated temperature, oxidizers, or peroxides.;The chemical is stable in soln at room temperature does not polymerize spontaneously. Commercial solns of the monomer may be stabilized with hydroquinone, t-butylpyrocatechol, N-phenyl-2-naphthylamine, or other antioxidants.
UNII
20R035KLCI
UN Number
2074;3426;1993;2074;2074;2074;2074
Vapor Density
2.45 (EPA, 1998) (Relative to Air);2.45 (Air = 1);Relative vapor density (air = 1): 2.45
Vapor Pressure
0.007 mm Hg at 68 °F (EPA, 1998);0.01 mmHg;0.9 Pa (7X10-3 mm Hg) at 25 °C;Vapor pressure, Pa at 25 °C: 0.9;0.007 mmHg;0.007 mmHg
Viscosity
2.71 cP at 25 °C /50% aqueous solution/
XLogP3
-0.7
If you have any other questions or need other size, please get a quote.
  • CAS
  • Size
  • Purity
  • Price
  • Availability
  • Quantity
  • Order
※ Please kindly note that our products are for research use only.
qrcode

Share

Interested in our Services & Products? Need detailed information?
facebook twitter linkedin

Contact Us

Email:
Tel:
Fax:
Address: