CAS 9003-05-8 Acrylamide Polymer (Mw.=400000-800000) (containing small amounts of formalin as fungicide) (10% in Water)

NAVIGATION

Acrylamide Polymer (Mw.=400000-800000) (containing small amounts of formalin as fungicide) (10% in Water)

PRICE INQUIRY

Catalog Number

ACM9003058-13

CAS Number

9003-05-8

Product Name

Acrylamide Polymer (Mw.=400000-800000) (containing small amounts of formalin as fungicide) (10% in Water)

Structure

Category

Polymers

Description

Acrylamide appears as white crystalline solid shipped either as a solid or in solution. A confirmed carcinogen. Toxic by skin absorption. Less dense than water and soluble in water. May be toxic by ingestion. Used for sewage and waste treatment, to make dyes, adhesives. The solid is stable at room temperature, but upon melting may violently polymerize. Toxic, irritating to skin, eyes, etc.;Acrylamide solution, [aqueous] appears as a colorless aqueous solution of a solid. Often at a concentration of 40% (w/v). Spills can easily penetrate the soil and contaminate groundwater and nearby streams. Used for sewage and waste treatment and to make dyes and adhesives. Toxic, irritating to skin, eyes, etc. Produce toxic oxides of nitrogen when burned.;Acrylamide solution, [flammable liquid label] appears as a solution of a colorless crystalline solid. Flash point depends on the solvent but below 141°F. Less dense than water. Vapors heavier than air. Toxic oxides of nitrogen produced during combustion. Used for sewage and waste treatment, to make dyes and adhesives.;DryPowder; Liquid; OtherSolid;Solid;WHITE CRYSTALS.;White crystalline, odorless solid.;White crystalline, odorless solid.

IUPAC Name

prop-2-enamide

Molecular Weight

71.08g/mol

Molecular Formula

C3H5NO;CH2=CH-CONH2;C3H5NO;C3H5NO

Canonical SMILES

C=CC(=O)N

InChI

InChI=1S/C3H5NO/c1-2-3(4)5/h2H,1H2,(H2,4,5)

InChI Key

HRPVXLWXLXDGHG-UHFFFAOYSA-N

Boiling Point

189 °F at 2 mm Hg (EPA, 1998);192.6 °C;192.6 °C;347-572°F (decomposes);347-572°F (Decomposes)

Melting Point

184 °F (EPA, 1998);84.5 °C;84.5 °C;84.5°C;84.5 °C;184°F;184°F

Flash Point

280.4 °F (EPA, 1998);280 °F (NIOSH, 2016);280 °F (NIOSH, 2016);138 °C (280 °F) - closed cup;138 °C c.c.;280°F;280°F

Density

1.122 at 86 °F (EPA, 1998);1.12 (NIOSH, 2016);1.12 (NIOSH, 2016);1.122 at 30 °C/4 °C;1.13 g/cm³;1.12;1.12

Solubility

greater than or equal to 100 mg/mL at 72° F (NTP, 1992);9.00 M;In water, 3.711X10+2 g/L at 20 °C; 4.048X10+2 g/L at 30 °C;Soluble in ethanol, ethyl ether and acetone;Solubility (g/100 mL) at 30 °C in: methanol 155; ethanol 86.2; acetone 63.1; ethyl acetate 12.6; chloroform 2.66; benzene 0.346; heptane 0.0068;WATER-SOL HIGH POLYMER;390 mg/mL at 25 °C;Solubility in water, g/100ml at 25 °C: 204 (very good);(86°F): 216%

Color/Form

Flake-like crystals from benzene;White crystalline ... solid;WHITE SOLID

Complexity

57.9

Covalently-Bonded Unit Count

EC Number

201-173-7;618-350-3;618-657-2

Exact Mass

71.037114g/mol

Formal Charge

Heat of Vaporization

61.5-76.5 kJ/mol at 357-413 deg K

Heavy Atom Count

ICSC Number

0091

Log P

-0.67 (LogP);log Kow = -0.67;-0.67;-0.78

MeSH Entry Terms

Acrylamide

Monoisotopic Mass

71.037114g/mol

NSC Number

118185;116575;116574;116573;7785

Odor

Odorless

Other Experimental

Boiling point: 87 °C at 2 mm Hg; 103 °C at 5 mm Hg; 125 °C at 25 mm Hg; readily polymerizes at melting point or under UV light;Conversion factor: 1 mg/cu m= 0.34 ppm, 1 ppm = 2.95 mg/cu m;Stable at room temperature but may polymerize violently on melting;Viscosity 50% aqueous solution: 2.71 cP @ 25 °C;Heat of polymerization: 19.8 kcal/mol;Henry's Law constant = 1.7X10-9 atm-cu m/mol at 25 °C (est);Hydroxyl radical reaction rate constant = 1.1X10-11 cu cm/molecule-sec at 25 °C (est);Ozone reaction rate constant = 1.8X10-18 cu cm/molecule-sec at 25 °C (est);POLYACRYLAMIDES, FREE OF MONOMER, ARE INERT

Rotatable Bond Count

RTECS Number

AS3325000

Stability

Stable under recommended storage conditions.;Thermally unstable. Polymerization may be caused by elevated temperature, oxidizers, or peroxides.;The chemical is stable in soln at room temperature does not polymerize spontaneously. Commercial solns of the monomer may be stabilized with hydroquinone, t-butylpyrocatechol, N-phenyl-2-naphthylamine, or other antioxidants.

UNII

20R035KLCI

UN Number

2074;3426;1993;2074;2074;2074;2074

Vapor Density

2.45 (EPA, 1998) (Relative to Air);2.45 (Air = 1);Relative vapor density (air = 1): 2.45

Vapor Pressure

0.007 mm Hg at 68 °F (EPA, 1998);0.01 mmHg;0.9 Pa (7X10-3 mm Hg) at 25 °C;Vapor pressure, Pa at 25 °C: 0.9;0.007 mmHg;0.007 mmHg

Viscosity

2.71 cP at 25 °C /50% aqueous solution/

XLogP3

-0.7