CAS 9002-86-2 polyvinyl chloride resin - Materials / Alfa Chemistry

NAVIGATION

polyvinyl chloride resin

PRICE INQUIRY

Catalog Number

ACM9002862-12

CAS Number

9002-86-2

Product Name

polyvinyl chloride resin

Structure

Category

Polymers

Description

Vinyl chloride appears as a colorless gas with a sweet odor. Easily ignited. Shipped as a liquefied gas under own vapor pressure. Contact with the unconfined liquid may cause frostbite by evaporative cooling. Leaks may be liquid or vapor. Vapors are heavier than air. May asphyxiate by the displacement of air. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket. Suspected carcinogen. Used to make plastics, adhesives, and other chemicals.;GasVapor, Liquid; Liquid; OtherSolid;COLOURLESS COMPRESSED LIQUEFIED GAS WITH CHARACTERISTIC ODOUR.;WHITE POWDER OR PELLETS.;Colorless gas or liquid (below 7°F) with a pleasant odor at high concentrations.;Colorless gas or liquid (below 7°F) with a pleasant odor at high concentrations. [Note: Shipped as a liquefied compressed gas.]

IUPAC Name

chloroethene

Molecular Weight

62.5g/mol

Molecular Formula

C2H3Cl;H2C=CHCl;(C2H3Cl)n;C2H3Cl;C2H3Cl

Canonical SMILES

C=CCl

InChI

InChI=1S/C2H3Cl/c1-2-3/h2H,1H2

InChI Key

BZHJMEDXRYGGRV-UHFFFAOYSA-N

Boiling Point

7 °F at 760 mm Hg (NTP, 1992);-13.3 °C;-13.8 °C;-13 °C;7°F;7°F

Melting Point

-245 °F (NTP, 1992);-153.7 °C;-153.84 °C;-154 °C;-256°F;-256°F

Flash Point

-110 °F (NTP, 1992);Gas (-108.4 °F (-78 °C)) - open cup.;-78 °C (-112 °F) - closed cup;-78 °C c.c.;-110°F;NA (Gas)

Density

0.969 at 8.6 °F (USCG, 1999);0.9106 g/cu cm at 20 °C;1.406;Density (vapour at 15 °C): 8 g/l;Relative density (water = 1): 0.9 (liquid);1.41 g/cm³;0.969 at 8.6°F;2.21(relative gas density)

Solubility

Slightly soluble (NTP, 1992);In water, 8.8X10+3 mg/L at 25 °C;In water, 2700 mg/L;Soluble in ethanol; very soluble in ethyl ether;Soluble in carbon tetrachloride and benzene;Soluble in hydrocarbons, oil, chlorinated solvents, and most common organic solvents.;HIGH MOL WT UNMODIFIED PVC SOL IN: CYCLOHEXANONE; METHYL CYCLOHEXANONE; DIMETHYL FORMAMIDE; NITROBENZENE; TETRAHYDROFURAN; ISOPHORONE; MESITYL OXIDE;LOW MOL WT PVC POLYMERS SOL IN: DIPROPYL KETONE; METHYL AMYL KETONE; METHYL ISOBUTYL KETONE; ACETONYLACETONE; METHYL ETHYL KETONE; DIOXANE; METHYLENE CHLORIDE;Solubility in water, g/l at 25 °C: 1.1 (poor);Solubility in water: very poor;(77°F): 0.1%

Color/Form

Colorless gas or liquid (below 77 degrees F) [Note: Shipped as a liquefied compressed gas];WHITE THERMOPLASTIC SUBSTANCE;PLASTIC SOLID;UNMODIFIED, RIGID PVC IS TRANSPARENT, COLORLESS TO AMBER; PLASTICIZED (NONRIGID) PVC IS TRANSPARENT, COLORLESS TO AMBER

Complexity

10.3

Corrosivity

Vinyl chloride is not corrosive when dry but in presence of moisture it corrodes iron and steel.

Covalently-Bonded Unit Count

EC Number

200-831-0;618-338-8;924-145-2

Exact Mass

61.992328g/mol

Formal Charge

Heat of Vaporization

160 Btu/Lb = 88 cal/g = -189.1X10+5 J/kg

Heavy Atom Count

ICSC Number

0082;1487

Log P

log Kow = 1.46;1.6

MeSH Entry Terms

Chloride, Vinyl;Chloroethylene;Vinyl Chloride

Monoisotopic Mass

61.992328g/mol

Odor

Ethereal odor;Mild, sweet odor;Pleasant odor at high concentrations;ODORLESS

Other Experimental

Liquifies in freezing mixture;Henry's Law constant = 0.0278 atm-cu m/mole at 25 °C;Hydroxyl radical reaction rate constant = 6.96X10-12 cu cm/molecule-sec at 25 °C;DC RESISTIVITY: 1X10+12-1X10+16 OHM/CM; INDEX OF REFRACTION: 1.54 D; DIELECTRIC CONSTANT @ 60 CYCLES/SEC: 3.2-4.0; @ 1X10+16 CYCLES/SEC: 3.0-4.0 /UNMODIFIED, RIGID PVC/;DISSIPATION FACTOR @ 1X10+6 CYCLES/SEC: 0.006-0.02; @ 60 CYCLES/SEC: 0.01-0.02; YIELD STRAIN: 1.0-5.0%; MODULUS OF ELASTICITY @ 1X10+3 LB/SQ IN: 200-600; TENSILE STRENGTH: 5000-9000 LB/SQ IN; ULTIMATE ELONGATION: 2.0-40% /UNMODIFIED, RIGID PVC/;NOTCHED IZOD IMPACT STRENGTH: 0.4-2.0 FT LB/IN; ROCKWELL HARDNESS: R110-R120; HEAT DISTORTION 264 LB/SQ IN: 60-80 °C; SPECIFIC HEAT: 0.2-0.28 CAL/G; LINEAR THERMAL EXPANSION COEFFICIENT, 1X10-5; 5.0-18 °C; MAX CONTINUOUS SERVICE TEMP: 70-74 °C; /UNMODIFIED, RIGID PVC/;DC RESISTIVITY: 1X10+11-1X10+14 OHM/CM; DIELECTRIC CONSTANT @ 60 CYCLES/SEC: 5.0-9.0; DIELECTRIC CONSTANT @ 1X10+6 CYCLES/SEC: 3.0-4.0; DISSIPATION FACTOR @ 60 CYCLES/SEC: 0.03-0.05; DISSIPATION FACTOR @ 1X10+6 CYCLES/SEC: 0.06-0.1 /PLASTICIZED (NON RIGID) PVC/;TENSILE STRENGTH: 1,500-3,000 LB/SQ IN; ULTIMATE ELONGATION: 200-400%; SPECIFIC GRAVITY: 1.15-1.35; SPECIFIC HEAT: 0.36-0.5 CAL/G; LINEAR THERMAL EXPANSION COEFFICIENT: 1X10+5, 7.0-25 °C; MAX CONTINUOUS SERVICE TEMP: 80-105 °C; INDEX OF REFRACTION: 1.50-1.55/D /PLASTICIZED (NON RIGID) PVC/;THERMOPLASTIC SUBSTANCE WITH HIGH RESISTANCE TO CHEMICALS; IT CAN WITHSTAND TEMPERATURES OF 65-80 °C VERY WELL; GOOD MECHANICAL & ELECTRICAL PROPERTIES

Refractive Index

Index of refraction: 1.3700 at 20 °C/D

Rotatable Bond Count

RTECS Number

KU9625000;KV0350000

Stability

An unstable polyperoxide is apparently formed in vinyl chloride through oxidation by atmospheric oxygen in the presence of any of a variety of contaminants. Storage under these conditions for a long period increases the concentration of unstable polyperoxide to hazardous levels.;Long-term exposure to air may result in formation of peroxides that can initiate explosive polymerization of the chloride.;STABILIZERS ARE NECESSARY TO PREVENT DISCOLORATION FROM EXPOSURE TO LIGHT OR HEAT;AT ORDINARY TEMPERATURES IT MAY UNDERGO SLOW DEHALOGENATION WITH EVOLUTION OF HYDROGEN CHLORIDE

UNII

WD06X94M2D

UN Number

1086;1086;1086;1086;1086

Vapor Density

2.15 (Air = 1);Relative vapor density (air = 1): 2.2;2.21

Vapor Pressure

3877.5 mm Hg (USCG, 1999);2.98e+03 mmHg;2980 mm Hg at 25 °C;Vapor pressure, kPa at 20 °C: 334;3877.5 mmHg;3.3 atm

Viscosity

0.01072 cP at 101.325 kPa, 20 °C (gas); 0.280 cP at -20 °C (liquid)

XLogP3

1.5