NAVIGATION

  • Home
  • Products
  • Polymer Science
  • Polymers
  • Polyacrylonitrile, average Mw 150,000

  • Polyacrylonitrile, average Mw 150,000

    Catalog Number
    ACM25014419-3
    CAS Number
    25014-41-9
    Product Name
    Polyacrylonitrile, average Mw 150,000
    Structure
    Category
    Polymers
    Description
    Acrylonitrile, stabilized appears as a clear colorless liquid with a strong pungent odor. Flash point 32°F. Prolonged exposure to the vapors or skin contact harmful. Density 6.7 lb / gal. Vapors heavier than air. Combustion produces toxic oxides of nitrogen. Requires storage and handling in closed systems. Used in insecticides and to make plastics, fibers and other chemicals. Rate of onset: Immediate Persistence: Minutes to hours Odor threshold: 17 ppm Source/use/other hazard: Plastics, coatings, adhesives industries; dyes; pharmaceuticals; flam gas.;Liquid;COLOURLESS OR PALE YELLOW LIQUID WITH PUNGENT ODOUR.;Colorless to pale-yellow liquid with an unpleasant odor.;Colorless to pale-yellow liquid with an unpleasant odor. [Note: Odor can only be detected above the PEL.]
    IUPAC Name
    prop-2-enenitrile
    Molecular Weight
    53.06g/mol
    Molecular Formula
    C3H3N;CH2=CH-CN;H2C(CH)CN;C3H3N
    Canonical SMILES
    C=CC#N
    InChI
    InChI=1S/C3H3N/c1-2-3-4/h2H,1H2
    InChI Key
    NLHHRLWOUZZQLW-UHFFFAOYSA-N
    Boiling Point
    171 °F at 760 mm Hg (EPA, 1998);77.3 °C;77.2 °C;77 °C;171°F;171°F
    Melting Point
    -116 °F (EPA, 1998);-83.5 °C;-83.51 °C;-84 °C;-116°F;-116°F
    Flash Point
    32 °F (EPA, 1998);-5 °C (23 °F) - closed cup;32 °F(0 °C)(open cup);-1 °C c.c.;30°F;30°F
    Density
    0.8004 at 77 °F (EPA, 1998);0.8007 at 25 °C;1.14-1.17;Relative density (water = 1): 0.8;0.81;0.81
    Solubility
    10 to 50 mg/mL at 70.9° F (NTP, 1992);1.40 M;In water, 7.45X10+4 mg/L at 25 °C;Very soluble in ethanol, acetone, benzene, ether;Acrylonitrile is ... miscible with ethanol, carbon tetrachloride, ethyl acetate, ethylene cyanohydrin, liquid carbon dioxide, ... toluene, petroleum ether, and xylene.;SOL IN DIMETHYLSULFOXIDE, DIMETHYLACETAMIDE, DIMETHYLFORMAMIDE;SOL IN MALEIC ANHYDRIDE, NITRILES, NITROPHENOLS, ETHYLENE CARBONATE, HOT BUTYROLACTONE; INSOL IN ALC, ACETONE, BENZENE, CARBON TETRACHLORIDE, PETROLEUM ETHER;Solubility in water, g/100ml at 20 °C: 7;7%
    Color/Form
    Clear, colorless liquid at room temperature;Colorless to pale-yellow liquid;WHITE FIBER
    Complexity
    54.9
    Corrosivity
    Attacks copper and copper alloys ... attacks aluminum in high concentration
    Covalently-Bonded Unit Count
    1
    EC Number
    203-466-5;613-396-0
    Exact Mass
    53.026549g/mol
    Formal Charge
    0
    Heat of Vaporization
    32.6 kJ/mol at 25 °C
    Heavy Atom Count
    4
    ICSC Number
    0092
    Log P
    0.25 (LogP);log Kow = 0.25;0.25
    MeSH Entry Terms
    Acrylonitrile;Cyanide, Vinyl;Vinyl Cyanide
    Monoisotopic Mass
    53.026549g/mol
    NSC Number
    7763;6362
    Odor
    Practically odorless, or with a very slight odor of peach kernels;Sweet odor;Irritating odor;Unpleasant odor;Onion, garlic, pungent
    Other Experimental
    ... Yellowing upon exposure to light indicates photo-alteration to saturated derivatives.;Solubility of water in acrylonitrile: 3.1 parts water/100 parts acrylonitrile;Saturated concentration in air = 257 g/cu m at 20 °C; 383 g/cu m at 30 °C;Dielectric constant at 33.5 MHz = 38; dipole moment = 3.88 D; molar heat of fusion = 66.15 kJ/mol; ionization potential = 10.75 eV; free energy of formation = 195 kJ/mol at 25 °C; enthalpy of formation (at 25 °C): 185 kJ/mol (gas), 150 kJ/mol (liquid); molar heat capacity: 111.1 kJ/mol K (liquid), 64.1 kJ/mol K (gas at 50 °C and 101.3 kPa); entropy (gas at 25 °C, 1 atm) = 274 kJ/mol K;Forms azeotropes with tetrachlorosilane, water, isopropyl alcohol, benzene, methanol, carbon tetrachloride, chlorotrimethylsilane.;Henry's Law constant = 1.38X10-4 atm cu m/mole at 25 °C;Hydroxyl radical reaction rate constant = 1.11X10-11 cu cm/molecule-sec at 25 °C;STICKS @ 235 °C; IRONING TEMP ABOVE 160 °C MAY CAUSE YELLOWING;TENSILE STRENGTH (PSI) 32,000-39,000; BREAK ELONGATION 20-80%; MOISTURE REGAIN 1.5% (70 °F, 65% RH); SOFTENS @ 455 °F; RESISTANT TO MINERAL ACIDS; FAIR TO GOOD RESISTANCE TO WEAK ALKALIES;EXCELLENT RESISTANCE TO COMMON SOLVENTS, OILS, GREASES, NEUTRAL SALTS, SUNLIGHT; ... IS DEGRADED BY STRONG ALKALIES. RESISTS ATTACK BY MOLDS, MILDEW, INSECTS.
    Refractive Index
    Index of refraction: 1.3911 at 20 °C/D
    Rotatable Bond Count
    0
    RTECS Number
    AT5250000
    Stability
    Stable under recommended storage conditions.
    UNII
    MP1U0D42PE
    UN Number
    1093;1093;1093;1093;1093
    Vapor Density
    1.9 (EPA, 1998) (Relative to Air);1.83 (Air = 1);Relative vapor density (air = 1): 1.8
    Vapor Pressure
    100 mm Hg at 73.4 °F (EPA, 1998);108.49 mmHg;109 mm Hg at 25 °C;Vapor pressure, kPa at 20 °C: 11.0;83 mmHg;83 mmHg
    Viscosity
    0.34 sq mm/s at 25 °C
    XLogP3
    0.2
    If you have any other questions or need other size, please get a quote.
    • CAS
    • Size
    • Purity
    • Price
    • Availability
    • Quantity
    • Order
    ※ Please kindly note that our products are for research use only.
    qrcode

    Share

    Interested in our Services & Products? Need detailed information?
    facebook twitter linkedin

    Contact Us

    Email:
    Tel:
    Fax:
    Address: